Avic Hd3 Firmware Update

Pioneer AVIC-HD3 firmware download GPS portable navigator device custom update. AVIC- Navigation Map Upgrade. The AVIC maps offer 3D view for certain Landmarks, Junction view & signpost view for a true to life experience. Firmware Update.

Toshiba 60GB 5400rpm MK6034GAX hard drive: -Direct replacement for your original drive -Unlocked -ATA Security disabled -Music partition enlarged with room for 400 CD´s in your library -Latest firmware, software (HD3-II) and European maps (CNDV-1000HD) -Gracenote CDDB database updated -Software/firmware/map update will start immediately and will take 0 to 5 minutes Ready to upgrade your *Pioneer Avic HD1, HD1BT, HD3, HD3BT or HD3-II? -To access your hard drive, push 'eject' button and turn ignition off after screen is fully extended. -Unscrew the two HDD cover T9 screws (torx 8 or 9 bit or driver will work) and slide out the hard drive being careful not to harm the screen or the drive -Mount the 60GB 5400rpm upgrade drive on the hard drive tray and slide the tray back into the unit -Be careful, the screws strip easily.

But if a screw strips, you can saw a groove on top of the screw and unscrew it with a flat screwdriver:) If you grind off the tip of your screwdriver, it will get a better grip and not slip. With the correct size philips screwdriver, you will be fine.

-Refit the HDD cover, turn on the ignition, push 'eject' button, lean back and watch your Avic unit upgrade itself! -Visit pioneer online and read about CNDV-1000HD to find out details about the upgrade. -Start ripping up to 250 CDs -Will not affect your two wire bypass (all European Pioneer Avic units can retain full functionality if you ground the light green parking brake wire).

The Gracenote database allows your Pioneer Hard Disk Navigation unit to identify album, song, and artist names. Updates to this database are released periodically, and can be updated by downloading and installing this latest update Attention: If you own the AVIC-HD3-II (with a version lower than 3.100.400), you will first need to update your system before the Gracenote database update below can be applied. To download the files and install the update, follow the instructions below: 1. Download the Update If your browser does not automatically start the download process, be sure that your browser or security software is set to allow downloading of files from this web site. You can also right-click the file name and select “Save As” to start the download process.

Decompress the files Once you have downloaded the file to your computer, locate the file on your hard disk drive and double click the file to decompress it. (If you do not have a decompression utility installed on your computer, you can easily download one for free.) 3. Create the Update Disc Burn all of the decompressed files to a recordable CD-R or CD-RW using a CD burning program (DVDs should not be used).

The decompressed files should include: • DISCINFO.txt • ECDDB.IDX • ECDDB.INF • ECDDB.MDT • ECDDB.UDT • ECDDB.UDX All of these files must be copied to the root of the CD and should not be copied into any folders. Please note that the CD you record must be in one of the following formats using Mode 1: ISO9660 level1/level2, Joliet, or Romeo. Note: Discs created with the built-in Windows XP CD burning software cannot be read by the AVIC-HD1BT. You must use a third-party CD burning program to create the disc in a CD-ROM Mode 1 format. Update your AVIC-HD1BT, AVIC-HD3BT or AVIC-HD3-II Update the firmware using the CD-R or CD-RW disc containing the firmware file. Perform the update following the procedure given in the update instructions.

Note: Do not turn off or disconnect power, or remove a disc while update is in progress. If you own the AVIC-HD3-II (with a version lower than 3.100.400), you will first need to download the AVICHD3-II Application Update and update the system before installing the Gracenote database update.